Skip to content
robotic-machinery-on-assembly-lines-can-be-used-for-precise-and-cost-effective-fluid-and-adhesive-dispensing-14098020

Adhesive Converting Learning Center

Easily find the answers you need about your flexible material problems.
Sort by:
Results filtered by:
Resource Type: Video
Resource Topic: Timeline Explanations, Reviews, Comparison, Pros and Cons

5 Tips for Overcoming Lead Times

5 Tips for Overcoming Lead Times

You’re sitting at your desk with a dazed expression, overcome by disbelief after a frantic exchange ...
Published on: December 7, 2022
Read More Read More about 5 Tips for Overcoming Lead Times

What is Included in My Custom Tape Quote and How Can I Compare it to Others?

What is Included in My Custom Tape Quote and How Can I Compare it to Others?

Nothing is more draining than opening up the email for your custom tape quote, only to stare at it, ...
Published on: January 15, 2023
Read More Read More about What is Included in My Custom Tape Quote and How Can I Compare it to Others?

The Pros and Cons of Using Your Own Adhesive Material

The Pros and Cons of Using Your Own Adhesive Material

Supplying your own material is like knocking on the pilot’s door and offering to be a co-pilot. ...
Published on: January 18, 2023
Read More Read More about The Pros and Cons of Using Your Own Adhesive Material

I Requested a Die Cut Quote, What's Next?

I Requested a Die Cut Quote, What's Next?

A wave of relief crashes into you as you press the Get Your Free Quote button on the request a ...
Published on: January 26, 2023
Read More Read More about I Requested a Die Cut Quote, What's Next?

I Asked for a Sample, Now What?

I Asked for a Sample, Now What?

You’ve finally summoned the courage to get a sample of your adhesive part, yet, the longer you’re ...
Published on: January 26, 2023
Read More Read More about I Asked for a Sample, Now What?

What Happens After I Place my Purchase Order with Strouse?

What Happens After I Place my Purchase Order with Strouse?

After days of mulling over your die cut quote, you finally send back a confirmation. However, the ...
Published on: February 13, 2023
Read More Read More about What Happens After I Place my Purchase Order with Strouse?

Mechanical Fasteners vs. Adhesive Tapes: Pros and Cons of Each

Mechanical Fasteners vs. Adhesive Tapes: Pros and Cons of Each

Have you ever stopped and thought to yourself, “Gee, I wonder if I should mount this painting with ...
Published on: March 13, 2023
Read More Read More about Mechanical Fasteners vs. Adhesive Tapes: Pros and Cons of Each

Masking Tape Rolls or Die Cuts: How Die Cuts Save Time and Money

Masking Tape Rolls or Die Cuts: How Die Cuts Save Time and Money

Imagine sitting down for a tattoo, but the artist refuses to use a stencil because it’s ‘too ...
Published on: April 2, 2023
Read More Read More about Masking Tape Rolls or Die Cuts: How Die Cuts Save Time and Money

How To Choose a Thermally Conductive Adhesive

How To Choose a Thermally Conductive Adhesive

Winning the lottery… eating at a Michelin-star restaurant… choosing a thermally conductive ...
Published on: April 12, 2023
Read More Read More about How To Choose a Thermally Conductive Adhesive

Which Roll Slitting Method is Best for My Product?

Which Roll Slitting Method is Best for My Product?

You’re a few minutes into your roll slitting research when you’re forced to acknowledge the ...
Published on: April 30, 2023
Read More Read More about Which Roll Slitting Method is Best for My Product?

What Does the Strouse Re-order Process Look Like?

What Does the Strouse Re-order Process Look Like?

After a successful first run, you’re ready to order more custom products.
Published on: August 21, 2023
Read More Read More about What Does the Strouse Re-order Process Look Like?

The Pros and Cons of Laser Cut Gaskets

The Pros and Cons of Laser Cut Gaskets

Is laser die cutting the best way to build a gasket?
Published on: January 8, 2024
Read More Read More about The Pros and Cons of Laser Cut Gaskets

Die Cut Machines vs. Hiring a Converter: Which is Better?

Die Cut Machines vs. Hiring a Converter: Which is Better?

The eternal manufacturing question: should I do this myself or hire a pro to do it for me?
Published on: February 1, 2024
Read More Read More about Die Cut Machines vs. Hiring a Converter: Which is Better?

3M Preferred Converter Advantages

3M Preferred Converter Advantages

How can you determine whether a converter is reputable?
Published on: February 14, 2024
Read More Read More about 3M Preferred Converter Advantages

4 Tips to Avoid a Line Shutdown

4 Tips to Avoid a Line Shutdown

“I’ll just expedite the order” is a dangerous assumption when sourcing custom products.
Published on: June 27, 2024
Read More Read More about 4 Tips to Avoid a Line Shutdown

We could not find any results based on your query, please try searching again.